To Next PageTo Next PageHow to improve the sealing quality of my Orved VMF0001 Kitchen Appliances?
If the quality of sealing worsens on your Orved Kitchen Appliances, it could be due to a dirty sealing bar. Try cleaning the sealing bar. Alternatively, the Teflon strip covering the bar may be worn. In this case, replace the Teflon covering.
What to do if the quality of sealing worsens on Orved Kitchen Appliances?
If the sealing quality of your Orved Kitchen Appliances deteriorates, it could be due to a dirty sealing bar. Try cleaning the sealing bar. Alternatively, the Teflon strip covering the bar may be worn. In this case, replace the Teflon strip.
What to do if the LEDs or display do not come on on my Orved VMF0001 Kitchen Appliances?
If the LEDs or display on your Orved Kitchen Appliance do not come on, there are several potential causes. First, ensure the appliance is properly connected to a functioning power outlet. If it is, check the power cord for any signs of damage. Also, verify that the fuse is intact and correctly inserted. If none of these steps resolve the issue, it may indicate damage to the vacuum packaging machine, requiring assistance from a service center.
Why is there insufficient vacuum in the bag when using my Orved VMF0001 Kitchen Appliances?
If you're experiencing insufficient vacuum in the bag with your Orved Kitchen Appliances, consider these possible causes and solutions: * The bag may be leaking, in which case you should change the type of bag you are using. * Sharp edges may be perforating the bag. To solve this, utilize thicker bags. * The bag opening may be dirty; use a new bag, and ensure you keep the opening clean.
What to do if I cannot create vacuum inside the containers with my Orved Kitchen Appliances?
If you cannot create a vacuum inside the containers using your Orved Kitchen Appliances, make sure the cover is correctly positioned. Reposition it and try creating the vacuum again, applying slight pressure on the cover. Also, check the gasket on the cover and the edge of the container for dirt. Clean them, then try creating the vacuum again while applying slight pressure.
Why is the pump on my Orved VMF0001 performing inefficiently?
If your Orved Kitchen Appliances pump has inefficient pump performance, this may be because liquids were sucked in during vacuum creation. Empty and clean the filter if your machine has one; otherwise, seek assistance from an authorized service center.
What to do if the LEDs or display do not come on in my Orved Kitchen Appliances?
If the LEDs or the display of your Orved Kitchen Appliance do not turn on, the issue might stem from several causes. First, ensure the appliance is properly connected to a functioning power socket. If the power cord appears damaged, inspect its condition for any visible wear or tear. Check the fuse to confirm it is correctly fitted and not blown. If these steps do not resolve the issue, it may indicate damage to the vacuum packaging machine, in which case you should contact the Technical Assistance Centre.
Why is the vacuum insufficient in the bag when using Orved Kitchen Appliances?
If you're experiencing an insufficient vacuum in the bag with your Orved Kitchen Appliances, consider these factors: The bag may be leaking; if this is the case, try changing the type of bag you are using. Also, sharp edges might be perforating the bag, so consider using thicker bags. Finally, a dirty bag opening can prevent a proper seal. Use a new bag and ensure the opening remains clean during the vacuum process.
Why is it impossible to create a vacuum inside the containers of Orved Kitchen Appliances?
If you find it impossible to create a vacuum inside the containers of your Orved Kitchen Appliances, it might be because the cover is not positioned correctly. Reposition the cover and redo the vacuum, pressing down lightly. Alternatively, the gasket on the cover or the edge of the container might be dirty. Clean these parts and try the vacuum process again, pressing down lightly on the cover.
How to fix an inefficient pump in Orved Kitchen Appliances?
If you have an inefficient pump in your Orved Kitchen Appliances (only for machines equipped with a filter), the cause may be liquids sucked in during vacuum creation. Empty and clean the filter on machines fitted with that accessory.
General| Model Number | VMF0001 |
|---|---|
| Power | 0.25 kW |
| Voltage | 230V |
| Weight | 27 kg |
| Chamber Volume | 4 m³/h |
| Sealing Bar Length | 260 mm |
| Pump Capacity | 4 m³/h |
| Dimensions | 330 x 480 x 320 mm |
| Sealing Method | Impulse |
| Frequency | 50 Hz |
| Sealing Width | 3 mm |
| Sealing Time | Adjustable |
| Vacuum Pressure | 2 mbar |
| Material | Stainless steel |
| Color | Stainless steel |
| Package Contents | Vacuum packaging machine, User manual |
