Need help?Do you have a question about the OSCO MSG-A and is the answer not in the manual?
General| Motor Voltage | 24V DC |
|---|---|
| Operating Temperature | -20°C to +50°C |
| Remote Control Range | 30 m |
| Operating Voltage | 24V DC |
| Maximum Current | 5A |
| Power Consumption | 120W |
| Control Distance | 30m |
| Safety Features | Obstacle detection |
| Frequency | 433 MHz |
Step-by-step guide for mounting the operator on posts.
Step-by-step guide for mounting the operator on a pad.
How to adjust the limit cams for gate travel.
Setting the automatic closing timer.
Setting the maximum run timer duration.
Calibrating current sensing for obstruction detection.
Details for connecting master and slave operators.
Explanation of the control board dip switch functions.
Adjusting current sense for opening and closing directions.
Information on battery backup for DC models.
Setting maximum run and auto-close timers.
Details on connecting master and slave operators.
Describes LEDs on the control board.
Describes LEDs on the motor board.
Covers operator start issues, motor/gate movement, and stopping problems.
Instructions on how to order replacement parts.
Procedure for replacing motor brushes.
Specific maintenance tasks to be performed every six months.
To Next Page