EasyManua.ls Logo

OSCO MSG-A - MSG-A MECHANICAL PARTS LIST

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MSG-A • MSG-D OPERATOR INSTALLATION GUIDE
- 25 -
MODEL MSG-A MECHANICAL PARTS LIST
REF
NO. PART NO. DESCRIPTION
1 2100-1614 Wrapper
2 2110-698 Middle Shelf Assembly
2A 2200-820 Bearing, 1”
4 2100-1960 Limit Switch Bracket
27 2500-440 Limit Switch
5 2510-260 Stop/Reset Button & Bracket Assembly
2100-1777 Stop/Reset Button Mounting Bracket
2500-1495 Stop/Reset Button Assembly
6 2100-1539 Front Cover
6A 2200-790 Lock and Keys for Front Cover
2110-578 Front Cover with Lock Assembly
2300-716 Stop/Reset Button Rubber Grommet
7 2100-1797 Bottom Shelf
8 2110-640 Upper Bearing Channel Assembly
9 2100-1821-BT Top Cover
10 2100-1652 Drive Shaft, 1”
11 2100-1542 Gear Reducer Mounting Angle
12 2100-299 Crank Spacer
90 2200-014 Set Collar, 1” x 3/8” LTB
13 2120-388 Torque Limiter Assembly
80 2100-1650 Plate with Solid Pin Groove
81 2100-1661 Keyed Plate
82 2300-390 Friction Disc, pair
83 2200-817 Belleville Washer
84 2100-1621 Belleville Washer Retaining Disc
85 2100-1622 Adjustment Nut
86 2400-407 Brass Tipped Set Screw
88 2400-416 Dowel Pin
89 2100-529 Woodruff Key
14 2510-251-B Power On/Off Switch Assembly with
Duplex Receptacles (115V Models only)
2500-1956 115VAC Duplex Receptacles only
2500-1957 115VAC Switch only
2510-252-B Power On/Off Switch Assembly for
230V Models only
2500-2205 230VAC Switch only
15 2100-1941 Power Box Mounting Bracket
REF
NO. PART NO. DESCRIPTION
16 2200-081 Gear Reducer
17 2200-079 Single Pulley, 7”
18 2200-860 #40 Chain, 29 Links
2400-145 #40 Half Link
19 2200-012 Single Pulley, 2”
Motors
20 2500-2090 1/2 HP, 115V, 1 Phase
2500-2091 1/2 HP, 208/230V, 1 Phase
2500-2092 3/4 HP, 115V, 1 Phase
2500-2093 3/4 HP, 208/230V, 1 Phase
21 2100-1465 Crank
22 2200-084 Sprocket, 40 B 13
23 2210-002 Sprocket, 40 A 45 with Bearing
87 2200-789 Sealed Bearing for Sprocket
24 2200-006 #40 Master Link
25 2200-080 V-Belt, 34”
26 2400-422 U-Nut, 5/16-18
28 2100-1748 Limit Cam
29 2400-067 Flat Washer, 1”
30 2200-015 Set Collar, 1”
31 2200-820 Precision Roller Bearing, 1”
32 2200-016 Moisture Seal
33 2300-035 Vent Plug
Note: For clarity, items listed below are not shown.
2500-033 Standard Three-Button Station
2400-360 Fender Washer, 1.5”
5-03-14

Table of Contents

Related product manuals