CONFIGURATION → SNMP V3
ENABLE V3
: SNMP V3 is enabled
: SNMP V3 is disabled
ENGINE ID
An octet string identifying the engine ID that this entry should belong to. The string
must contain an even number (in hexadecimal format) with number of digits between
10 and 64, but all-zeros and all-'F's are not allowed. The SNMPv3 architecture uses
the User-based Security Model (USM) for message security and the View-based
Access Control Model (VACM) for access control. For the USM entry, the
usmUserEngineID and usmUserName are the entry's keys. In a simple agent,
usmUserEngineID is always that agent's own snmpEngineID value. The value can
also take the value of the snmpEngineID of a remote SNMP engine with which this
user can communicate. In other words, if user engine ID equal system engine ID then
it is local user; otherwise it's remote user.
DELETE
Check to delete the entry. It will be deleted during the next save.
USERNAME
A string identifying the user name that this entry should belong to. The allowed string
length is 1 to 14. The maximum users that can be added are 5.
SECURITY LEVEL
Indicates the security model that this entry should belong to. Possible security models
are:
• NoAuth, NoPriv: No authentication and no privacy.
• Auth, NoPriv: Authentication and no privacy.
• Auth, Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That means it
must first be ensured that the value is set correctly.
AUTHENTICATION PROTOCOL
Indicates the authentication protocol that this entry should belong to. Possible
authentication protocols are:
• MD5: An optional flag to indicate that this user uses MD5 authentication
protocol.
• SHA: An optional flag to indicate that this user uses SHA authentication
protocol.
The value of security level cannot be modified if entry already exists. That
means must first ensure that the value is set correctly.
AUTHENTICATION PASSWORD
A string identifying the authentication password phrase. For MD5 authentication
protocol, the allowed string length is 8 to 32. For SHA authentication protocol, the
allowed string length is 8 to 40.