OSEE T5+ - Front Panel Joystick Operations

Features
14
No.
Connector
Description
2
SD card slot, the SD card is used to load the
customized LUT tables, and update firmware.
3
HDMI IN
HDMI input interface, supports HDCP,
compatible DVI1.0, HDMI 1.4
4
Battery
Input
External battery NP-F, 5
～
17V
5
BATT OUT
Battery output, 5
～
8.4V
6
DC IN
DC power input, 5
～
17V, Type-C
7
Remote
Remote control, 2.5mm Jack
8
Headphone output jack, 3.5mm stereo Jack
* Support SONY NP-F and Canon LP-E6 battery currently.
4.2 Buttons and Functions
The monitor provides a Joystick at the front panel, as shown in Figure
4.2-1. It is used for monitor settings, adding tools for scenes, tools settings,
zoom image and so on.