Need help?Do you have a question about the OSEE T5+ and is the answer not in the manual?
Introduction to the T5+ monitor as a high-performance UHD HDMI On Camera Monitor for outdoor photography.
Support 4K HDMI input, output to external cameras, waveform, histogram, audio meter, multiple assistants.
Includes joystick navigation, battery support, color profiles, anamorphic desqueeze, and zoom functionality.
Details FCC compliance statement and operational conditions for the device.
Lists essential safety instructions for device operation, handling, and maintenance to prevent hazards.
Provides guidelines for preventing damage to power cords and ensuring secure HDMI cable connections.
Details the components included in the T5+ monitor package and verification steps upon receipt.
Describes optional dummy battery adapters for powering external cameras via the BATT OUT interface.
Provides instructions for preparing the device, checking for damage, and connecting cables for signal and power.
Guides on how to install batteries correctly and attach the sunhood for improved viewing.
Explains how to install hangers using screw holes and shows accessory attachment examples.
Identifies and describes the input/output interfaces and connectors on the rear panel of the T5+ monitor.
Explains the functionality and five operation directions of the front panel joystick for navigation and control.
Details the power switch location and the two methods for powering the T5+ monitor: battery or DC input.
Describes how to use 2X and 4X zoom modes, including panning the enlarged image.
Lists the HDMI signal formats supported by the T5+ monitor across various resolutions and frame rates.
Explains how to access and navigate the monitor settings menu using the joystick.
Details how to select the input signal source, specifically focusing on HDMI input.
Covers adjustments for volume, backlight brightness, and image display rotation (vertical, horizontal, mirror).
Explains settings for Input Range, Input Matrix, Color Management, and loading User LUTs.
Details how to update firmware, select language, and perform a factory reset of the monitor settings.
Tools for setting viewing frame markers like aspect ratio, safe area, center, and crosshatch.
Tools for exposure analysis including false color, zebra pattern, waveform, vectorscope, and histogram.
Features to assist with camera focus, including focus assist and peaking functions.
Provides functionality for loading 3D USER LUTs and enabling DE-LOG mode for HDR/SDR conversion.
Enables the display of multiple analysis charts like waveform, histogram, and vector simultaneously.
Allows adding and configuring an audio meter to display audio levels on the screen.
Covers adding, deleting, loading, and turning tools on/off within scenes.
Provides specifications for the T5+ monitor, including display, signal formats, and connector types.
Details power requirements, operating temperature, dimensions, weight, and key features.
Illustrates the physical dimensions of the T5+ monitor through front, back, side, and top views.
To Next Page
General
