OSEE T5+ - Load;Close Tool Bar

Scenes and Tools
74
6.2.4 Load/Close Tool Bar
In a scene, after added the tools, you can load the tool bar or close the
tool bar. The instructions are as below:

Load Tool Bar
First
, scroll the joystick right to access a scene;
Second
, press the joystick straight down to load the tool bar for the
current scene, the tool bar will be displayed the leftmost of the screen,
as shown in Figure 6.2-8. The bar labeled in the red rectangle are the
tool bar for the current scene.
Figure 6.2-8 Tool Bar for A Scene

Close Tool Bar
 After loading a tool bar, scroll left to close the tool bar.
 When in tool setting pane, press the joystick down to return to
tool bar, then scroll left to close the tool bar.