OSEE T5+ - Delete a Tool

Scenes and Tools
78
Or press the joystick straight down again to turn off HISTOGRAM.
Scroll right to access the Tool Settings menu, it will display the histogram
settings pane, as shown in Figure 6.2-13. It lists the characteristics of
histogram in this menu, such as STYLE, POSITION, TRANSPARENCY
and ENABLE switch. After finish the parameter settings, scroll the joystick
left to return to the tool bar.
Figure 6.2-13 Settings Menu for Histogram
 The parameters of the tool could not be modified until the tool is
opened.
6.2.7 Delete a Tool
In a scene, press the joystick straight down to display the tool bar for
current scene, and scroll the joystick up or down to select the tool which
you want to delete, then scroll right to access the tool setting menu, and
scroll down to select DELETE command at the end of the menu list, as
shown in Figure 6.2-14.