OSEE T5+ - Powering On the T5+ Monitor

Features
18
Direction
Operation
menu.
4.4 Power On
The power switch is on the right corner of the rear panel of T5+. Use it to
power the T5+ on or off.
Figure 4.4-1 Power Switch
 Power Method
There are two methods for powered T5+ as below:
Method 1: Powered by battery. There is a built-in bidirectional battery
slot at the rear panel of the monitor. It supports both SONY NP-F
series and Canon LP-E6 batteries. (6V
～
8.4V)
Method 2: Powered by DC power input. Use smart phone charger or
power bank to connect external power through the Micro USB DC IN
interface. (5
～
17VDC)
 Power On Operation
First, install the battery or connect the power cord.