Scenes and Tools
76
The tool could only be turned on or off in the tool bar displayed status.
6.2.6 Tool Settings
Add tools for a scene through tools menu, then, set a tool’s attributes by
scrolling the joystick right, it will display the tool settings pane.
Scroll the joystick left or right to switch among different scenes. The tool
bar is hidden when switching to a scene by default. You should press the
joystick straight down to display the tool bar for the current scene.
Operate the tool bar to display each tool settings menu, and set tool’s
attributes. Refer to “6.1 Scenes Tools Settings” for the details of each tool.
For example: Display histogram on a scene.
In a scene, press the joystick straight down to display the tool bar at the
left side of the screen. Scroll up or down to move the cursor onto Add
button, as shown in Figure 6.2-11:
Figure 6.2-10 Add Button
Then press it straight down to display the Tools menu, scroll down to
To Next Page
Loading...
