OSEE T5+ - Turn ON;OFF a Tool

Scenes and Tools
75
6.2.5 Turn ON/OFF a Tool
In tool bar, follow the instructions below to turn on or off a tool swiftly:

Turn on a Tool
After adding a tool, press the joystick down to turn on the tool in tool
bar, the icon will turn from gray to highlight green.

Turn off a Tool
After turning on a tool, press it down again to turn off this tool in tool
bar, the icon will turn from highlight green to gray.

Open tool setting pane
After adding a tool, scroll the joystick right to access tool settings
pane, as shown in Figure 6.2-9
Figure 6.2-9 Tool Setting Pane
Press the joystick down to return to the tool bar.