OSEE T5+ - Installation Steps: Preparation and Connections

Unpack and Installation
8
Type
Description
T5+-Kit2
Optional, including SONY NP-FZ100 dummy
battery and HDMI Micro cable
T5+-Kit3
Optional, including Panasonic DMW-BLF19
dummy battery and HDMI Micro cable
T5+-Kit4
Optional, including CANON LP-E6 dummy
battery and HDMI Mini cable
Figure 3-1 Connect BATT OUT to Dummy Battery
Installation:
1. Prepare for installation
Please follow the procedures below before installing T5+:
 Check the package and equipment for any visible damage that
may have occurred during transit.
 Confirm all the items listed on the packing list have been
received.
 Remove all the packing material including electrostatic-resistant
packing.