OSEE T5+ - Look Tools: LUT Loading and DE-LOG

Scenes and Tools
61
Figure 6.1-18 Look Tools
Table 6.1-6 Description of Look Tools
Tool
Items
Default
Domain Range
Description
DE-LOG
TYPE
SDR
SDR/
HDR
Select the de-log type
USER
LUT
ID
LUT1
LUT1~LUT10
Select a user LUT ID
INTENSITY
100%
1~100%
Set the intensity of the LUT
effected to current display
USER LUT
NAME
--
--
Display the user LUT name
selected in ID
1. DE-LOG & COLOR MANAGEMENT
The monitor is equipped with DE-LOG tool to active HDR or SDR to
current input signal for different dynamic range. Before activating
DE-LOG, you should select a camera profile and active the
LOG/HDR item on in monitor settings at first:
As the precondition for
DE-LOG
switch, set
camera profile

COLOR MANAGEMENT

LOG/HDR
item in monitor settings to be
ON
and select
camera profile

COLOR MANAGEMENT

COLOR PROFILE/ GAMMA/ GAMUT
items according to your
camera connected with T5+
,
the settings pane is as shown in Figure
6.1-19: