OSEE T5+ - Page 63

Scenes and Tools
57
Figure 6.1-13 Position of the Assistant Elements
7. TRANSPARENCY
There are 4 degrees of opacity for display the histogram, waveform
and vectorscope on the screen. Set the transparency through the
TRANSPARENCY
item.
 100%: when opacity set to 100%, the assistant element
(histogram, waveform or vectorscope) is opaque, not
transparent.
 75%: when opacity set to 75%, the assistant element (histogram,
waveform or vectorscope) is proportional to 75% opacity.
 50%: when opacity set to 50%, the assistant element (histogram,
waveform or vectorscope) is proportional to 50% opacity.
 25%: when opacity set to 25%, the assistant element (histogram,
waveform or vectorscope) is proportional to 25% opacity.
For example:
set
EXPOSE

HISTOGRAM

TRANSPARENCY
as
100%, 75%, 50%, 25% separately, the comparisons are as below: