EasyManua.ls Logo

oset MX-10 2017 - Battery Care and Disposal; Battery Safety, Care, and Monitoring

oset MX-10 2017
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
BATTERY USE, CARE AND MAINTENANCE
Failure to properly use, charge and store the baeries will void the warranty, and may
cause a hazardous situaon. DO NOT use this baery with any other vehicle or appliance.
Use of this baery with any other product will void the warranty, and may create a
hazardous condion that could cause a re resulng in severe injury or death,
and property damage.
WARNING!
Never short circuit the discharge terminals of the baeries, ie touching the contacts
together via a tool, etc. A short circuit will damage the baery and could cause a re
resulng in severe injury or death, and property damage.
WARNING!
Keep the baery away from excessive heat and/or open ames. Avoid long term exposure
to direct rays from the sun.
CAUTION
Protect the baeries from water or other moisture. If the baeries become wet from rain
during use, dry as soon as possible. Remove the baeries from the bike before washing.
CAUTION
To avoid damage to the baery, never subject it to intense physical shock or
severe vibraon.
CAUTION
Never open the baery box. Doing so could damage the baery & will void the warranty.
WARNING!
26
BATTERY CARE & DISPOSAL
Your OSET features a 48v drive system, for use with a sealed 48V lithium baery.
Under NO circumstances should this baery box be opened by anyone other than a
trained OSET technician.
Doing so can damage the baery and/or bike & will void any warranty.
OSET recommend using a ‘mulmeter’ to
monitor the health of the baery. You will be
able to easily and instantly see the charge of
the baery.
In order to test the baery voltage using a
mulmeter, connect the negave & posive
probes to a pair of pins on the discharge port
on the baery as shown.
A mulmeter is also very useful in diagnosing
any electrical problems on the bike.
We are condent that you will enjoy many miles of pleasurable riding with your OSET
electric bike baeries. However, baeries do eventually wear out.
When this happens, we urge you to properly dispose of your used baeries.
For guidance regarding proper disposal of your baeries, please contact your local dealer,
distributor or the customer service department at OSET.
In the USA you can nd very useful informaon regarding used baery drop-o sites from
the Rechargeable Baery Recycling Corporaon (RBRC) at www.rbrc.org or through their
ocial program www.call2recycle.org.
For UK customers, please visit www.recyclenow.com to nd your local recycling centre.
BATTERY DISPOSAL
When tesng the baery voltage, you should have a reading of between 34.0 & 54.4V
depending on the state of charge of the baery. If you read anything outside of this
range, please disconnect the baery immediately and contact your OSET dealer,
importer or OSET customer services.

Related product manuals