-S8-
CAUTION
●To prevent burns, comply with the following cautions.
● Do not directly touch the high-temperature parts of a nozzle, an electrode and so on.
● When welding, wear suitable protection such as leather gloves for welding.
● Do not replace torch tip elements before they cool off.
CAUTION
●If any parts are damaged, replace them with new ones for further
safety and better quality.
●Be sure to place an order for replacement parts at our sales office or our agency.
CAUTION
●Do not disassemble the shock sensor. If disassembled, gas
leak and malfunction may be caused.
3.4 Cooling water
CAUTION
●
Be sure to run the cooling water for the torch of water-cooled
specification. Insufficient amount of running water may lead to
damage of torch.
3.5 Cable hose
CAUTION
●Never let cable hoses touch any heated part of the welded, put
something heavy on top nor bend them excessively because the
welding torch might become damaged.
To Next Page
Loading...
