Need help?Do you have a question about the OTC DTX-3000 AC/DC and is the answer not in the manual?
Measures to protect operators from welding hazards like radiation, noise, and fumes.
Procedure for TIG welding, including cable connection and setup.
Procedure for MMA welding, including cable connection and parameter setup.
Detailed explanation of the control panel functions and settings.
General| Rated Output Voltage | 32V |
|---|---|
| Protection Grade | IP21S |
| Input Power | 50/60Hz |
| Output Current Range | 300A |
| Welding Process | MMA, TIG |
| Duty Cycle | 60% |
To Next Page
