Battery charger for the PUMA T2 hand-held radio
Technical Manual
Functional Description
P/N: 779-0357/02
Revision 04
OTE Proprietary Information
Page 21
3. FUNCTIONAL DESCRIPTION
In this section there are the functional descriptions of the BCP2-850, BCP6-850,
BCU2-1500, BCU2-1500/B and BCU6-750 battery charger models.
In particular in chap. 3.1 the BCP2-850 and BCP6-850 are described, while the
BCU2-1500, BCU2-1500/B and the BCU6-750 models are described in chap. 3.2.
3.1 BCP2-850 E BCP6-850: FUNCTIONAL DESCRIPTION
The BCP2-850 two slot battery charger and the BCP6-850 six slot battery charger
perform NiCd and NiMH batteries fast recharging/discharging, suitable for the
PUMA T2 terminal, with automatic selection of the battery pack.
Both battery chargers are made up of two sections: a power supply section
containing the transformer while the other one contains a couple of charging slots
(three couples for the BCP6-850). The equipment also has a side cover.
In fig. 3.1 there is shown the BCP2-850 model while the BCP6-850 is shown in fig.
3.2.
Fig. 3.1: BCP2-850
POWER SUPPLY
SECTION
(TRANSFORMER)
CHARGING SLOT
E
TI
N
To Next Page
Loading...