Battery charger for the PUMA T2 hand-held radio
Technical Manual
Preventive maintenance
P/N: 779-0357/02
Rev. 02, December 2002
Marconi Proprietary information
Page 41
Equipment
Battery charger for PUMA T2 hand-held radio
Operation
Check and cleaning
Required tools
- Soft brush
-
Soft cloth
Consumable materials
- Deoxidizing spray
Form number
PM-01
Page
1/2
6 Months I
PROCEDURE
Carefully read all the safety recommendations before you
proceed.
• Check the general status of the battery charger. Check that the power supply cable and
the supply plug are not damaged.
• Clean the external parts of the battery charger. Remove the dust by a soft brush and any
possible stain by a soft cloth. Both the brush and the cloth must be dry or just a bit
moistened.
• Verify the status of the connectors in the battery charger slots. If necessary, clean the
contacts by spraying them with a deoxidizing spray.
• Check the correct functioning of the battery charger.
To Next Page
Loading...