OTIS OI-315 TOCSIN3 - User Manual

!
!
!
!
OI-315 TOCSIN
3
Personal Monitor
________________________________________
Operation Manual
Revision 2.0
___________________________________________________________________________________________________
___________________________________________________________________________________________________
!

Summary

Product Overview

Introduction

Complete System Diagram

Complete System Components

Identifies the physical components of the OI-315 monitor, including sensor, buttons, display, and clip.

LCD Display Symbols

Power On Procedures

Power Off Procedures

Basic Operation

Gas Measure Mode

Describes the primary operating mode for gas detection and monitoring.

LCD Backlight Control

Instructions on how to turn the LCD backlight on and off.

Viewing Date and Time

How to view the current date and time settings on the device.

Setting Date and Time

Setting Alarms

Default Alarm Set Points

Lists the standard pre-configured alarm set points for various gases.

Alarm Displays and Indicators

Low Alarm Recovery

Steps to return to normal operation after a low alarm event.

High Alarm Recovery

Peak, STEL, and TWA Value Indication

Battery Notifications

Data Logging and Event Review

Fresh Air Calibration

Standard Gas Calibration

Calibration Gas Concentrations

Lists the pre-set concentrations for various calibration gases.

Battery Replacement

Required Items for Battery Replacement

List of tools and parts needed for battery replacement.

Sensor Element Replacement

Required Items for Sensor Replacement

List of tools and parts needed for sensor element replacement.

User Notices and Precautions

Approval Label Information

Technical Specifications

Warranty Statement

OTIS OI-315 TOCSIN3 Specifications

General

Brand	OTIS
Model	OI-315 TOCSIN3
Category	Gas Detectors
Language	English