66
External Communications
Data values that are too large to fit in the constant-width field, are modified so that the
numeric digits are displayed as # (##.## for example). The sign and decimal point are
preserved.
C. (Q)uit
Responding with a Q or q will reset the multiprobe to full terminal mode and can then be
connected to Hydras 3 LT.
B.6.2 Data Display
If the TTY menu is not used, a line of data is periodically displayed on the next available
line. If the screen is full, the lines are scrolled. All data lines are terminated with <cr><lf>
and have the same formatting as the (M)easure command described above.
To Next Page
Loading...
