28
Operation
5. Enter the name for the new log file. The empty log file is now created.
6. Enter the start and end time of the logging, the logging interval, the sensor warm-up
time before logging, and how long before logging the circulator will be turned on, and if
audio signals will be used while logging.
7. Select the parameters in the ‘Parameter in Sonde’ list and click the
ADD button to
place them into the ‘Parameters in log file’ list. Change the order of the parameters
using the
ARROW buttons.
8. Click
UPDATE SETTING to send the configuration to the Sonde.
9. Click
ENABLE to start collecting data. Click DISABLE to stop collecting data during
logging. A fully completed logging run will automatically disable at the end of the run.
10. Click
DOWNLOAD to download and display the log file. Select Printable or
Spreadsheet format.
Note: To delete a log file, select the log file in the Log File drop-down menu and click the DELETE
button.
4.3.3.2 Downloading Log Files
After a log file is created in the Log Files tab, the files can be downloaded by checking the
appropriate Log File box and clicking
DOWNLOAD SELECTED FILES. Multiple files can be
downloaded at once. The downloaded log files are stored in the ‘LogFiles’ subdirectory of
the HYDRAS 3 LT directory on the hard drive.
To Next Page
Loading...
