OTT PLS - 1 Scope of Supply; 2 Order Numbers

1 Scope of supply
䊳
OTT PLS – 1 Pressure probe with a ceramic, capacitive, relative pressure measuring cell
and shielded pressure probe cable with pressure compensation capillary and
Kevlar core for length stabilization. Pre-fabricated cable end with transport
protection against moisture.
– 1 Set of operating instructions
– 1 Factory acceptance test certificate (FAT)
2 Order numbers
䊳
OTT PLS OTT PLS pressure probe 63.037.001.9.0
– Version with 4 … 20 mA interface
– Version with SDI-12 interface
– Version with RS-485 interface (SDI-12 protocol)
Required order information
– Measuring range: 0 … 4 m;
0 … 10 m;
0 … 20 m;
0 … 40 m;
0 … 100 m
– Cable length: 1 … 200 m (with SDI-12 interface: 1 … 100 m)
䊳
Accessories Humidity absorbing system OTT FAD 4PF 63.025.021.4.2
– desiccant cartridge in clear container with connection
tube for pressure compensation capillary
Humidity absorbing system OTT FAD 5 63.037.025.3.2
– connecting box (pressure probe cable ↔ connection cable
datalogger/voltage supply) with desiccant cartridge
Dessicant cartridge 97.100.066.4.5
– replacement cartridge in transport container
Cable attachment 96.140.173.9.5
Connection cable 97.000.040.9.5
– twisted pair construction; LiYY
– PVC, black
– 2 x 2 x 0.75 mm
2
– unshielded
Connection cable 97.000.039.9.5
– twisted pair construction; FD CP (TP)
– PVC, gray
– 2 x 2 x 0.5 mm
2
– shielded
4