3 Basic safety information
䊳
Read these operating instructions before using the OTT PLS for the first time!
Make yourself completely familiar with the installation and operation of the
OTT PLS! Retain these operating instructions for later reference.
䊳
The OTT PLS is used for measuring the water level of ground and surface
waters in hydrometry. Only use the OTT PLS as described in these operating
instructions!
For further information, ➝ see Chapter 4, "Introduction".
䊳
Note all the detailed safety information given within the individual work steps.
All safety information in these operating instructions are identified with the
warning symbol shown here.
䊳
Ensure the electrical, mechanical, and climatic specifications listed in the
technical data are adhered to.
For further information ➝ see Chapter 11, "Technical data".
䊳
Do not make any changes or retrofits to the OTT PLS. If changes or retrofits are
made, all guarantee claims are voided.
䊳
Have a faulty OTT PLS inspected and repaired by our repair center. On no
account carry out repairs yourself!
For further information ➝ see Chapter 9, "Repair".
䊳
Dispose of the OTT PLS properly after taking out of service. On no account put
the OTT PLS into the normal household waste.
For further information ➝ see Chapter 10, "Note about the disposal of old
units".
5
To Next Page
Loading...
