To Next PageTo Next Page
Need help?Do you have a question about the Otto Bock 3R80 and is the answer not in the manual?
General| Weight Limit | 125 kg |
|---|---|
| Knee Joint Type | Polycentric |
| Amputation Level | Transfemoral |
| Maximum Body Weight | 125 kg |
| Impact Resistance | Yes |
| Waterproof | Yes |
| Hydraulics | Yes |
| Max User Weight | 125 kg |
| Adjustable Stance Phase Control | Yes |
| Adjustable Swing Phase Control | Yes |
| Polycentric Design | Yes |
| Category | Knee Joint |
| Material | Aluminum |
| Water Resistance | Waterproof |
| Features | Adjustable stance and swing phase control |
Details on compatible and incompatible prosthetic components for the 3R80/3R80=ST.
Specifies mobility grades, temperature ranges, and conditions for safe product use.
Information on the tested service life of the prosthetic component.
Defines the meaning of caution and notice symbols used for safety alerts.
Provides essential safety precautions and general instructions for safe operation.
Details on how to fabricate a prosthesis, including alignment and adjustments.
Guidance on using a cosmetic cover, including talcum and lubrication.
Details how to measure heel height using specific equipment and formula.
Instructions for cutting and deburring the tube adapter to the correct length.
Guides on securely mounting the tube adapter with proper torque.
Method for measuring and setting the socket flexion angle using a goniometer.
Procedure for marking key reference points on the prosthetic socket.
Procedure for positioning the patient on the alignment apparatus to determine the load line.
Optimizing static alignment by adjusting plantar flexion based on load line.
Checks initial settings against factory defaults for adjustments.
Adjusts flexion damping to control prosthetic foot swing-through.
Adjusts extension damping to prevent hard impact at full extension.
Adjusts stance phase damping for controlled knee flexion during weight-bearing.
Adjusts the load threshold for activating stance phase damping.
Adds an extra spring for increased support during full extension.
Secures damping adjustments by closing protective covers.
Important information and cautions for daily use of the prosthesis.
Step-by-step guide on how to lock and unlock the knee joint mechanism.
Instructions for cleaning the prosthetic component with approved agents and water.
Manufacturer's liability limitations based on usage and component combinations.
States compliance with EU medical device directives and classification.
