Otto Bock B-Series User Manual (English)

Questions and Answers:

D
Dennis McfarlandAug 22, 2025
What to do if my Otto Bock Wheelchair battery is discharging too quickly?
- C
  Craig VargasAug 22, 2025
  If your Otto Bock Wheelchair battery is discharging too quickly, the batteries may be dead or damaged, so check and replace the battery if needed. Also, the battery charger could be defective or unsuitable, therefore you should check its operation and replace it if necessary. A blocked motor or jammed brake can also cause rapid battery discharge, in which case you should replace the motor with the brake.
S
Sarah HaleSep 2, 2025
What to do if my Otto Bock Wheelchair displays M2 Motor Error 3C00?
- J
  Jason BarronSep 2, 2025
  If your Otto Bock Wheelchair displays an 'M2 Motor Error 3C00', it indicates that the right motor is not connected, possibly due to a defective plug connection or cable break, or the motor is defective. Check the plug connections and cable to the right motor. Also, check the right motor.
B
Benjamin MyersSep 1, 2025
What to do if my Otto Bock B-Series Wheelchair displays M1 Motor Error 3B00?
- J
  Justin HuntSep 1, 2025
  If your Otto Bock Wheelchair displays an 'M1 Motor Error 3B00', it means the left motor is not connected, possibly due to a defective plug connection or cable break, or the motor is defective. Check the plug connections and cable to the left motor. Also, check the left motor.
K
Kelly GloverAug 31, 2025
What does Joystick warning (Center Joystick) mean on Otto Bock B-Series Wheelchair?
- J
  jamesjohnsonAug 31, 2025
  If your Otto Bock Wheelchair displays a 'Joystick Warning (Center Joystick)', it means the joystick was not in the home position when the unit was turned on. Position the joystick in the home position before switching on the unit.
S
Shelby SimsAug 30, 2025
What to do if my Otto Bock B-Series displays M1 Brake Error 1505?
- H
  hwilliamsAug 30, 2025
  If your Otto Bock Wheelchair shows an 'M1 Brake Error 1505', it indicates a brake error on the left motor. This could be due to a defective plug connection, a cable break, or a defective brake. Check the plug connections and cable to the brake. If necessary, replace the motor with the brake.
M
Mrs. Sara CarrilloAug 29, 2025
What does Inhibit Active error mean on Otto Bock B-Series Wheelchair?
- E
  elizabeth80Aug 29, 2025
  If your Otto Bock Wheelchair displays an 'Inhibit Active' error (1E01, 1E20, 1E21, 1E22, 1E23), it means the driving function is blocked due to external factors. Disconnect the battery charger.
M
Mr. Steven ValentineAug 27, 2025
Why Otto Bock B-Series is not driving straight?
- S
  sylvia22Aug 27, 2025
  If your Otto Bock Wheelchair isn't driving straight, it might be due to incorrect programming. Adjust the straight compensation in the software.
C
carolyn66Aug 27, 2025
What to do if Otto Bock B-Series displays Emergency stop error?
- M
  Michelle CrawfordAug 27, 2025
  If your Otto Bock Wheelchair displays an 'Emergency Stop' error, it indicates a severe malfunction in the controller, handheld control unit, or drive motor. Check the cabling and plug contacts, and then contact a specialist dealer.
J
Janet WilsonAug 25, 2025
What to do if Otto Bock B-Series shows High Battery?
- T
  taylorscottAug 26, 2025
  If your Otto Bock Wheelchair displays a 'High Battery' message, it indicates battery overvoltage. Drive the wheelchair at low speed only and check the cabling and plug contacts. If the error persists, contact the manufacturer.
S
stonewilliamAug 25, 2025
What to do if Otto Bock B-Series Wheelchair shows Low Battery?
- T
  Thomas KentAug 25, 2025
  If your Otto Bock Wheelchair indicates a 'Low Battery' warning, it means the battery voltage is too low. You should charge the battery as soon as possible.