57
Total 0000 kWH
Total 000.0 kAH
BACK DCkWH
The Secondary Stats screen shows the total accumulated
DC and AC kilowatt hours and kiloamp hours of the
Charge Controller.
Pressing the <DCkWH> soft key switches the screen
between DC kilowatt hours and AC kilowatt hours
• DCkWH shows the DC kilowatthours and should be
used in a non-grid-tied system
• ACkWH is used with a grid-tied system. This measure is
based on a 90% inverter e ciency (1 kWH DC= 0.9 kWH
AC)
Pressing the rst soft key three times returns to the MAIN
Menu screen.
Total 0000 kWHAC
Total 000.0 kAH
BACK ACkWH
Secondary STATS screen
To Next Page
Loading...
