EasyManua.ls Logo

Outback Power Systems FLEXmax 60 - User Manual

Outback Power Systems FLEXmax 60
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Maximum Power Point Tracking Charge Controller
Users Manual
Installation and Programming
max
T M
80
max
T M
60

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Outback Power Systems FLEXmax 60 and is the answer not in the manual?

Outback Power Systems FLEXmax 60 Specifications

General IconGeneral
Maximum PV Input Voltage150 VDC
Maximum Charge Current60 A
Efficiency98%
Temperature Range-40°C to 60°C
Nominal Battery Voltage12, 24, 48 VDC
ProtectionOvervoltage, short circuit
CommunicationRS-232
Maximum Input Power3000 W

Summary

Installation Guidelines and Safety Instructions

Installation Standards and Requirements

Compliance with national and local electrical codes for installations.

Determining Wire Sizes

Open Circuit Voltage and Wire Sizing

Guidance on calculating VOC and selecting appropriate wire and disconnects.

FLEXmax Wire and Disconnect Sizing

Specific recommendations for FLEXmax 80 and FLEXmax 60 wire sizing.

Charge Controller Wiring Connections

Status Screen

Accessing the MAIN Menu

Charger Setup Configuration

Adjusts Current Limit, Absorb, and Float recharging voltage set points.

Advanced Menu Configuration

Allows fine-tuning of charge controller operations like Snooze and MPPT limits.

Troubleshooting Guide

Typical Array Sizing Guide

WIRE AND DISCONNECT SIZING

WIRING COMPARTMENT

FIVE YEAR LIMITED WARRANTY INFORMATION

Related product manuals