Outback Hunter - Drip Tray and Hood Fittings

8
7
Attach the hood handle (A3) to the hood (A1) by inserting the handle bolts (D4) through the handle
(A3), handle spacers (D3), heat shield (A2), and through the front wall of the hood (A1). Secure with
washers (D2) and nuts (D1). Attach the heat gauge (A9) onto hood, by slotting its screws into the
holes in the hood and securing with the heat gauge nuts (A10).
A9
A10
A1
D2
A3
D4
D3
A2
D1
8
B9
Replace the drip tray (B9) by sliding it underneath the barbecue body.