5. Multimeter Offline Record – the "+" model only
When measuring using the multimeter with offline record function, you can
use Android/iOS device APP or PC software to send a command, the
multimeter will start recording the measurements. After receiving the
command, the connection will be disconnected automatically. The
multimeter will record the measuring data in its own memory. After
completion of the record, use APP or PC software to reconnect the
multimeter, and then you can read the measuring data into the device as a
CSV file. You can use this function to record for a long time without staff on
duty, while reducing Bluetooth consumption to conserve the battery power
of the multimeter.
Note: When the low battery indicator
appears on the meter screen,
the offline record function may not work correctly. Please check the
batteries of the meter to ensure them in a good state.
Offline Record for Android Device
(1) Connect the Android device with the multimeter, see "How to Connect
with Android Device" on P10.
(2) In APP single view, tap on the icon on the top right, select
from the pop-up menu.
(3) Set "Record interval" and "Records count" (maximum records count is
10,000). Tap on
. The memory in the multimeter can only
store the recording data of one time. When start to record, the earlier
offline record stored in the multimeter will be overwritten.
(4) After starting, in two seconds, the APP interface will display
To Next Page
Loading...
