Click "start offline record". The memory in the multimeter can only store
the recording data of one time. When start to record, the earlier offline
record stored in the multimeter will be overwritten. After completion of
the record, the Bluetooth of the multimeter will be disabled
automatically, and the Bluetooth symbol on the multimeter screen will
disappear.
Note: If the multimeter is in the process of recording data and not
finished yet, the APP can not connect with the multimeter. If you want to
interrupt the recording process of the multimeter, press and hold
until
disappear on the display, or turn the multimeter off.
(4) After completion of the record, to read the measuring data, press and
hold
until appear on the display. Reconnect the software
and the multimeter.
(5) On software interface, click softkey on the right, a dialog will show.
The file name start with "Offline", the following part can be customized.
(6) Click "Read Record", the software will read the measuring data and save
as a CSV file into computer. After reading, the dialog is as below:
(7) Click "Open Directory" to open the directory where the CSV files are
saved.
To Next Page
Loading...
