The file name start with "Offline", the following part can be customized.
(6) Tap on "Read data", APP will read the measuring data and save as a CSV
file into the iOS device.
After reading, display as below:
(7) Tap on "Display data", the data will be displayed in Data Graph and Table
interface.
Offline Record for PC Software
(1) Connect the multimeterBLE software with the multimeter, see "How to
Connect with Computer" on P13.
(2) On software interface, click the softkey on the right, a dialog will
show.
(3) Set "Interval" and "Record counts" (maximum records count is 10,000).
To Next Page
Loading...
