Offline Record for iOS Device
(1) Connect the iOS device with the multimeter, see "How to Connect with
iOS Device" on P12.
(2) In APP device view, tap on the softkey on the right, select "Record
setting" from the pop-up menu.
(3) Set "Record interval" and "Records counts" (maximum records count is
10,000). Tap on "start offline record". The memory in the multimeter
can only store the recording data of one time. When start to record, the
earlier offline record stored in the multimeter will be overwritten. After
completion of the record, the Bluetooth of the multimeter will be
disabled automatically, and the Bluetooth symbol on the multimeter
screen will disappear.
Note: If the multimeter is in the process of recording data and not
finished yet, the APP can not connect with the multimeter. If you want to
interrupt the recording process of the multimeter, press and hold
until
disappear on the display, or turn the multimeter off.
(4) After completion of the record, to read the measuring data, press and
hold
until appear on the display. Reconnect the iOS device
and the multimeter.
(5) In APP device view, tap on the softkey on the right, select "Record
read" from the pop-up menu.
To Next Page
Loading...
