d. Click Cancel button or click other part outside the setting box to cancel the current setting
value.
6. Setting A few times
a. The number of automatic storages can be set before the automatic storage function is enabled.
After automatic storage is enabled, the real-time data storage task will be executed according
to this set. When the task is completed, the automatic storage function will be disabled
automatically (for example, when the number of storages is set to 10, the automatic storage
function will be disabled when ten groups of real-time data are stored);
b. Click “A few times” button and set the number of storages in the display box below (setting
range: Once &10&20&30);
c. After setting the number of storages, click Save button to complete the number setting of the
real-time data storage;
d. Click Cancel button or click other part outside the setting box to cancel the current setting
value.
To Next Page
Loading...
