4. Auto save: The automatic storage function is to save the data of the real-time data interface
according to a fixed period. If a device is being connected, the automatic storage function can
be enabled, or else the automatic storage function cannot be enabled. Besides, the automatic
storage function is automatically enabled when all the devices are disconnected.
5. Setting Periodic
a. Before the automatic storage function is enabled, the automatic storage cycle can be set. When
automatic storage is enabled, the real-time data storage tasks will be executed according to
this cycle.
b. Click “Periodic” button and set the recording cycle in the display box below (setting range: 1s~
11h: 59m: 59s).
c. After setting the cycle, click Save button to complete the setting of the recording cycle of
real-time data.
To Next Page
Loading...
