Owon SDS7102 - Setting the Vertical System

5.Performance parameters
23
5. Performance parameters
Note: "V" for VGA interface (optional), SDS8302 and SDS9302 including VGA interface as default.
Model
Bandwidth
Sample rate
Rise time
Horizontal Scale(S/div)
SDS6062(V)
60 MHz 500 MS/s ≤ 5.8 ns 5 ns/div – 100 s/div, step by1-2-5
SDS7072(V)
70 MHz 1 GS/s ≤ 5.0 ns
2 ns/div – 100 s/div, step by1-2-5
SDS7102(V)
100 MHz 1 GS/s
≤ 3.5 ns
SDS8102(V)
100 MHz 2 GS/s
SDS8202(V)
200 MHz 2 GS/s ≤ 1.7 ns
1 ns/div – 100 s/div, step by1-2-5
SDS8302
300 MHz 2.5 GS/s
≤ 1.17 ns
SDS9302
300 MHz 3.2 GS/s
Display
8" Colored LCD, 800 x 600 pixels, 65536 colors
Channel
2 + 1 (External)
Record length
Max 10M
Input coupling
DC, AC , Ground
Input impedance
1 MΩ ± 2%, in parallel with 10 pF ± 5 pF
Max. input voltage
400 V (PK-PK) (DC + AC PK-PK)
DC gain accuracy
± 3%
Vertical sensitivity
2 mV/div - 10 V/div
Trigger type
Edge, Video, Slope, Pulse, Alternate
Trigger mode
Auto, Normal, Single
Line/field
frequency (Video)
Support standard NTSC, PAL and SECAM broadcast systems
Automatic
measurement
Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot,
Freq, Period, Rise Time, Fall Time, Delay A→B
, Delay A→B , +Width,
-Width, +Duty, -Duty, Cycle rms, Cursor rms, Duty cycle, Phase
Waveform Math
＋, －, ×, ÷, FFT
Waveform storage
15 waveforms
Communication
interface
USB 2.0, USB flash disk storage; LAN, Pass/Fail; VGA interface (only for the
model with "V" or the models including VGA interface as default) or RS-232
(Optional);
Power supply
100 V – 240 V AC, 50/60 HZ,CAT Ⅱ
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com