Each sequencer mode focuses on several tasks that it does best; for example, a Mono sequencer
has an instant visual feedback of the melody and more compositional centered tools, meanwhile in
Multitrack mode you have 8 mono tracks with instant mute and solo buttons per track. Chord mode
is a great tool to write the foundation chord progression of a song, meanwhile Polyphonic mode
offers total freedom up to 7 notes per step. We’ll cover more in detail how each works in the
Sequencer modes section.
–––––––––––––––––––––
It’s possible to have any combination of the existing sequencer modes
on the 4 available sequencer slots.
–––––––––––––––––––––
Turn OFF OXI One by holding the power button for at least 2 seconds. It will remember its last state
after the next startup: loaded project and configuration.
Clock settings won’t be remembered, auto-sync will be implemented in future firmware releases.
· BATTERY
The battery icon shows a rough estimation of the battery status.
The battery is charging when the icon is blinking, and fully charged when it is steady and not
blinking. The OXI One battery should last between 5 and 8 hours depending on the usage and the
LEDs consumption.
When the status icon is , it means that the battery voltage has dropped to around 3.7V which is
the nominal voltage of the battery. The OXI One will still have plenty of hours of use left.
To Next Page
Loading...