13
Descaling
1
Add Descaling
Solution
Add a mixture of water and
descaling solution to water tank.
Dilute your descaling solution by
following the water-to-solution ratio
on your descaling solution.
Note: If using vinegar to descale, fill the
water tank to the 6-cup line with vinegar
and fill to the 12-cup line with water to
make a 50/50 ratio.
2
Run the
Cleaning Cycle
Turn knob until “CLEAN” is
highlighted and press to select.
Note: Cleaning cycle will take around
25 minutes. Time will vary based on
amount of mineral deposit. Allow cycle to
finish to ensure machine is fully descaled.
3
Run a
Water-Only Cycle
Add filtered water to the 12–cup
fill line and run 9-12-cup cycle with
water only to rinse machine.
Scale is a naturally occurring buildup of mineral deposits.
How often you should descale your Coffee Maker depends
on water hardness.
OXO Brew Descaling Solution is available at www.oxo.com;
follow solution’s recommended use.
Notes on Descaling
The display screen will show an exclamation point next to CLEAN every 90 cycles as a helpful reminder that it’s time to
descale. Your Coffee Maker will not work properly if it is not descaled regularly. The warranty is voided if descaling is
not carried out in accordance with these instructions. Using filtered water will help prevent mineral buildup.
To Next Page
Loading...
