Chapter 6: Tail Assembly
OXY0303 - Tail Boom Assembly
OXY0343 - Tail Case Insert
B516MXL Timing Belt
( Box3 / Bag 6 )
TCEM2X5 - M2X5
Hex Cap Screw
2 x TCEM2X6 - M2X6
Hex Cap Screw
Tail Case Assembly
Tail Bell Crank Suppport Assembly
page 11
Tail Shaft Assembly
Tensioner Assembly
4 x TCEM2X6 - M2X6
Hex Cap Screw
Fine Adjust Shims Note :
In order to give fine adjustment options,
in the Extra Hardware Bag you will find
extra shims 4X6X0.1.
Start assembly WITHOUT any
shims. If Tail Shaft has sideways play
more than 0.2mm,
add shims as required, to one side, as shown.
PRO TIPS: For best Tail performances little
side play is recommended.
Note: all screws in this step
need add loctite during assembly.
Vertilcal Fin Assembly
before install any shim
read carefully fine
adjustment shims note.
TCEM2X22 - M2X22
Hex Cap Screw
OXY0648 - Tail Case Rod
To Next Page
Loading...
