37
If the installed system does not seem to be working properly, first make sure that all the cables are securely
connected, then carry out the following checks, in the order shown.
Check Suggested solution Further checks, if there is still a problem
Is anything lighted on your
set-top’s front panel?
YES
D
NO
R
Power may not be reaching your set-top.
Make sure that the power cord is properly
plugged in. If there is a switch by the wall AC
power outlet, switch it ON.
Check that the wall AC power outlet is working (for example,
by plugging in a lamp).
Does your remote control
operate your set-top?
YES
D
See the next page
NO
R
Your set-top may not be turned on.
Check if the power light on the front panel is
green. If it is not, press the power button on
the front panel to turn on your set-top.
Check that nothing is blocking the path from your remote
control to the front panel.
Check that your remote control is currently set to operate
your set-top. (Consult the instructions supplied with your
remote control.)
If your remote control will still not operate your set-top,
replace the batteries in your remote control.
SOLVING PROBLEMS
To Next Page
Loading...
