33
© Pacojet International AG 2022
5
Reattach the protective beaker. Attach
the baseplate by inserting the four screws and
tightening them with a hex key.
Carefully set the device upright. Plug the device in
and turn it on.
Note: Insert a protective beaker and then
turn the device back on. The shaft will then
rise back up automatically.
Remove the pacotizing
®
blade and spray guard as
applicable.
If the shaft does not rise back up, send the
protective beaker, pacotizing
®
blade with spray
guard, and device to the service partner in the
original packaging.
Clean the shaft and the tool coupler with a wash-
cloth.
7 8
9
6
To Next Page
Loading...