Pacojet Junior - Page 18

13
EN
Item
number
Operangelement Funcon
18 PORTION
QUANTITY
INDICATOR
Indicateshowmanyporonswillbepacozedbefore
theprocessstarts(seealso“PORTIONINGKEYS”).
Ifthisindicatorisdark,theenrepacozingbeaker(10)
will be processed.
Eachnishedprocessedporonisdeductedfromthe
totalontheindicator.
Attheendofthepacozingprocess,thenumberof
poronsprocessedashes.
Iftheprogrammedquantyislargerthantheactual
quantyinthebeaker,thequantythatsllneeds
tobepacozedwillbedisplayedattheendofthe
pacozingprocess.Thisremainingquantycanbe
processedonceanotherpacozingbeakerisinserted
intothedevice.
Ifyoudonotwishtoprocessanyfurtherporons,you
candeletetheremainingquantyinthedisplayusing
the“STOP/RESET”KEY.
Forcertaintypesoferror,thisdisplaymayalso
contain an Error message.(SeeChapter“9.Defects”on
page 31).
19 READY DISPLAY Lightsupwhentheprotecvebeaker(12)hasbeen
aachedcorrectlytothedevice.ThePacojet Junior can
now be programmed and started.
20 POWER DISPLAY ThePOWER DISPLAYhastwofuncons.
1.)Aeritisswitchedon,thePacojet Junior is in
“operangmode”.
Thedevicecannowbeprogrammed.
2.)Ifnoaconistakenwithin5minutes(i.e.,nobuons
areoperatedorprocessesiniated),thedevice
switchesto“standbymode”andthedisplaylights
up RED.
21 START KEY TheSTARTKEYhastwofuncons.
1.)Switchesthedevicefrom“standbymode”to
“operangmode”.
2.)Startsthedeviceonceprogrammingiscomplete.