Pacojet Junior - Page 25

20
EN
6.
Selectthenumberofporonsyouwishtoprocess.
UsethePORTIONINGKEYS(23)forthispurpose.
SeealsoChapter“5.3Display”onpage 12.
Rememberthatthedeviceneedstobein“operang
mode”(see“STARTKEY”onpage 13).
7.
StartthepacozingprocessbypressingtheSTART
KEY(21).
Themotorstartsandsetsthepacozingsha,blade
holder(2),andpacozingblade(9)inmoon.
Youcantrackthepacozingblade’svercalmoon
usingtheUP/DOWNDISPLAY(17).
Anyporonsalreadyprocessedareindicatedbythe
ashingBEAKERCONTENTSINDICATOR(16).
Unprocessedporonsarerepresentedbyabarthat
islitupconnuously.
Oncethepacozingprocessiscomplete,
thepacozingshaandbladeholder(2)retracts
withthepacozingbladetothestartposionand
comestoastop.Themotorswitcheso.
Ifnecessary,thepacozingprocess
canbeinterruptedorhaltedatany
mebyoperangtheRESET/STOP
key(22).Inthiscase,thepacozing
sha(2)retractstothestartposion.
SeealsoChapter“5.3Display”onpage 12.