Pacojet Junior - Page 33

28
EN
Cleaningcycle
1.
Inserttheemptypacozingbeaker(10)intothe
protecvebeaker(12).
2.
Placethebluecleaninginsert(15)intothepacozing
beaker(10)withthebrushespoinngupwards.
Thenplacethebluesealingring(14)ontothe
pacozingbeaker.
3.
Fillthepacozingbeaker(10)withwarm water
(approx.58°C)unlitreachestheboomedgeof
thebrushes.
Addthespeciedquantyofcleaningagent
(seeChapter“8.1.2Cleaningagents”onpage 24).
1
2
4.
Aachtheprotecvebeaker(12)withthepacozing
beaker(10)tothePacojet Junior.
Todothis,slidetheuprightprotecvebeakerwith
pacozingbeakerupwardsintotheroundedmoldon
thebasetocenterit
1
.
Startthisstepbymakingsurethatthehandleis
poinngtotherightinthestarngposionandthat
thetopofthepacozingbeakerisatonthedevice.
Turntheprotecvebeakerfromrighttole
approximately90°totheleunlthestopinthe
holder
2
.
Thehandlewillpointforwardswhentheprotecve
beakerisaachedcorrectly.
Note
Riskofdamagecausedbyusingthewrong
accessories!
• Neverusethepacozingblade(9)forthe
cleaningcycle.