Pacvac Superpro 700 - Superpro Micron 700 Specifications

Quote these part numbers when ordering spare parts
No. Part Name Part No.
1. Lid - Plastic - Clear - 270mm LID001
2. Dust Bag - Disposable - Paper - Sealed - Pkt 5 DUB004
3. Dust Bag - Reusable - SMS - Bucket - Pkt 1 DUB007
4. Filter - Pre-Motor - Cartridge - HEPA FIL003
5. Canister - Micron 700 CAN005
6. Gasket - Motor - Rubber - 150mm GAS007
7. Motor - Two Stage - Flow Through - 240V - 1000W MOT001
8. Gasket - Motor - Rubber - 150mm GAS007
9. Latch - Aluminium - Silver - 65mm LAT001
10. Insulation - Noise - Foam - 180mm INS008
11. Intermediate Housing - Insert - Power Outlet - IEC C17 - Power Inlet -
IEC C14 - Blue INH008
12. Power Inlet - IEC C14 - Panel Mount PWI002
13. Power Outlet - IEC C17 - Panel Mount PWO001
14. Switch - On-Off - Non-Illuminated - Black SWI001
15. Insulation - Motor - Foam - 420mm INS009
16. Holder - Short Lead - Plastic - Black HOL004
17. Short Lead - IEC C13 Vertical Right Angle - 420mm - 3C - Plug Type I SHL001
18. Cage - Motor Filter - Plastic - Black CAG001
19. Filter - Exhaust - Flat - Foam FIL004
20. Bottom Cap - Plastic - Black - 175mm BOT001
21. Extension Lead - 18m - 3C - Plug Type I EXL001
21a. Power Cord - IEC C13 Vertical Right Angle - 18m - 3C - Plug Type G PWC007
21b. Power Cord - IEC C13 Vertical Right Angle - 18m - 3C - Plug Type E/F PWC006
15
Specications
Volts / Frequency: 220-240V~50Hz
Motor: 240V 1000W Two Stage Flow Through
Noise Level: 65dB(A) ± 3dB(A) (at 1.5m)
Filtration: 4 stage, HEPA Rated High Grade Filter
Volumetric Airow (per second): 39 litres
Capacity: 5 litres
Weight: 5.3kg (excluding power cord assembly and hose)
Vibration Level: <2.5m/s²
Technical specications, part numbers and parts proles are subject to change without notice.
Support: +61 8 9479 1444 www.pacvac.com