Pacvac Superpro 700 - Work Right: The Fishbone Method

6
Work Right
LOOK AT THE LAYOUT (refer to the Fishbone Method below)
• Find the most easily located power point. This is your starting location at the sh’s head.
Your turnaround is the ‘tail’.
• Check the room layout (position of desks, tables, chairs, ttings etc.)
• Check the condition of the oor - how dirty it is on a scale of 1 to 10.
PLAN THE PROCESS
• See in your mind the shbone method over the entire area or room to be cleaned.
• Decide which areas are to be detail cleaned (the spine), or spot cleaned (the ribs).
CLEAN SMARTER
• Work away from the power point.
• Work one side of the shbone towards tail. Then back the other side towards head.
• Work to the plan - long strokes for the detail clean area and short dabs for the spot cleans.
3
4
1
2
Fish Head Start
Spine Heavy Trafc Areas -
Detail Clean
Ribs Light Trafc - Spot Clean
Tail Turn Around