Quote these part numbers when ordering spare parts
No. Part Name Part No.
1. Lid - Plastic - Clear - 270mm LID001
2. Dust Bag - Disposable - Paper - Cone - Pkt 5 DUB001
3. Dust Bag - Reusable - SMS - Cone - Pkt 1 DUB003
4. Filter - Pre-Motor - Cartridge - HEPA FIL001
5. Canister - Trans 700 CAN006
6. Gasket - Motor - Rubber - 150mm GAS007
7. Motor - Two Stage - Flow Through - 120V - 950W MOT004
8. Seal - Motor - Rubber - 145mm SEA002
9. Latch - Aluminium - Silver - 65mm LAT001
10. Electrical - Bridge Rectier - 35A ELE005
11. Insulation - Noise - Foam - 180mm INS008
12. Intermediate Housing - Insert - Power Outlet - IEC C17 - Blue INH007
13. Switch - On-Off - Non-Illuminated - Black SWI001
14. Insulation - Motor - Foam - 420mm INS009
15. Cage - Motor Filter - Plastic - Black CAG001
16. Screw - Aluminium - 1mm x 9mm SCR007
17. Clamp - Cable - Plastic - White - 34mm CLA001
18. Grommet - Cable - Rubber - Black - 48mm GRO001
19. Filter - Exhaust - Flat - Foam FIL004
20. Bottom Cap - Plastic - Black - 175mm BOT001
21. Power Cord - Hard Wired - 18m - 2C - Plug Type A PWC008
22. Holder - Fuse - Plastic - Black - 42mm HOL009
23. Electrical - Fuse - Time Lag - 10A ELE006
24. Power Outlet - IEC C17 - Panel Mount PWO001
17
Specications
Volts / Frequency: 120V~400Hz
Motor: 120V 850W Two Stage Flow Through
Noise Level: 63dB(A) ± 3dB(A) (at 1.5m)
Filtration: 4 stage, HEPA Rated Hypercone
TM
Filter
Volumetric Airow (per second): 29 litres
Capacity: 5 litres
Weight: 5.1kg (excluding power cord assembly and hose)
Vibration Level: <2.5m/s²
Technical specications, part numbers and parts proles are subject to change without notice.
Support: +61 8 9479 1444 www.pacvac.com
To Next Page
Loading...
