INSTALLATION MANUAL - cod. 00 477 0811 - 12/2011 - Palazzetti - PN - Italy 51/144
USE AND & MAINTENANCE
ENGLISH
11 MENUS
This chapter illustrates the contents of the menus on the stove’s display, accessed using the procedure described
in paragraph 7.3.
11.1 OPERATING SETTINGS MENU
This menu is used to set and adjust stove operation, and displays all the operating parameters.
Access the “OPERATING SETTINGS MENU” following the “Procedure for accessing the menus” described in
paragraph 7.3.
The display will show parameters “P” (power), “F” (fan speed) and T (temperature).
To move from one parameter to the next press the
button (“OK”).
(“+”) and (“-”) buttons.
Once all the parameters have been set, press
(“x”) to exit the menu.
11.2 TIMER MENU
This menu is used to set the custom programs for automatically starting and/or switching off of stove, as described
in paragraph 10.1.
11.3 STOVE SETTINGS MENU
This menu offers the possibility to set various different functions, through a series of submenus.
Access the “STOVE SETTINGS MENU” following the “Procedure for accessing the menus” described in
paragraph 7.3.
SUBMENU DESCRIPTION SYMBOLS & MESSAGES
TIME Access this submenu to set and adjust the clock
DATE Access this submenu to set and adjust the calendar
LANGUAGE Access this submenu to select the desired language
MENU TYPE Access this submenu to select one of the three types of user
interface: COMPRESSED, SCROLLING or EASY.
STAND-BY
During operation (i.e. when the stove is on and in steady
operating conditions) the stove can be switched off when
reaching the set room temperature (SET ROOM T.) and start
again when reaching the set minimum room temperature
(START TEMP.).
Two parameters can be set:
When this function is active,
the display shows the “*”
symbol.
“STAND-BY” is displayed
when the room temperature
is higher than the set “START
TEMP.”.
BUZZER Access this submenu to activate or deactivate the buzzer. The
alarm signals are always active in either case.
NIGHT SET
T.
When the stove is off this function ensures the stove maintains
the set room temperature (useful at night) (NIGHT SET T.);
This menu has just one parameter, which can be set to
“OFF” (function disabled) or alternatively a temperature value
(between 3° and 20°C) representing the temperature below
which the stove will start.
When this function is active,
the display shows the “
”
symbol.
“ N I G H T ST AN D - B Y ” i s
displayed when the room
temperature is higher than the
set “NIGHT SET T”.
LOCK
BUTTONS
Access this submenu to disable or enable operation of the
parameters. When this function is active, simply press the
ON
and
OFF
buttons together to lock or reset panel operation.
RESET Restores the factory settings.
ECONOMY Access this submenu to set the stove’s maximum operating
output in automatic mode.
The set power level will never be exceeded, thus keeping fuel
consumption under control.
To Next Page
Loading...
Need help?
General
