Palfinger ILK 33 User Manual

ILK
INSTALLATION MANUAL
& CHECK-OFF SHEET
ECN-M1508 Rev. 1.6, Date 09-21-20 Part #90-0413-200
PALFINGER Liftgates, LLC. 15939 Piuma Ave., Cerritos, CA 90703
Tel (888)-774-5844 Fax (562)-924-8318
PALFINGER Liftgates, LLC. 572 Whitehead Road, Trenton, NJ 08619
Tel (609)-587-4200 Fax (609)-587-4201
Visit our website at www.palfinger.com for up to date information and notifications
If you received this product with damaged or missing parts,
Please contact PALFINGER Liftgates at (888)-774-5844

Palfinger ILK 33 Specifications

General

Brand	Palfinger
Model	ILK 33
Category	Fencing & Gates
Language	English

Summary

Important Notes

Gate Overview and Components

Dimension Sheets

Truck Chassis Dimension Sheet

Details required measurements for truck chassis preparation and fitment.

Trailer Chassis Dimension Sheet

Details required measurements for trailer chassis preparation and fitment.

ILK22/ILK33 Low Mount 700mm Arm Dimensions

Specific installation dimensions for ILK22 and ILK33 with 700mm arms.

ILK33/ILK44/ILK55 800mm Arm Dimensions

Specific installation dimensions for ILK33, ILK44, and ILK55 with 800mm arms.

ILK66 900mm Arm Dimensions

Specific installation dimensions for the ILK66 model with a 900mm arm.

Chassis and Body Preparation for Special Applications

Flip-Up Door & Full-Door Seal Kit Installation

Procedures for installing seal kits for flip-up and full doors.

Swing Door Applications

Guidelines for installing the liftgate behind swing doors.

Gate and Platform Installation

Sill Preparation

Steps to prepare the rear sill of the vehicle for liftgate mounting.

Installation with Mounting Fixture

Procedures for installing the gate using a dedicated mounting fixture.

Bolt-On Mount Plate Installation

Details for bolting mount plates to the chassis for different models.

Platform Installation

General steps for installing the platform onto the lift arms.

Attach Platform to Liftarm

Detailed procedure for connecting the platform to the lift arms.

Installation and Adjusting Tilt Cylinders

Guide for installing and properly adjusting the tilt cylinders.

Installation Without Mount Fixture

Steps for installing the liftgate without using a mounting fixture.

Setting and Operation of B-15 Sensor

Procedures for setting and operating the B-15 sensor.

Setting and Operation of B-13 Sensor

Procedures for setting and operating the B-13 sensor.

Installation of Left and Right Up Stops

Installing up stops for proper liftarm positioning.

Fork Lift Locks Installation for Re-enforced Platforms

Installation guide for optional forklift locks on reinforced platforms.

Final Welding

Guidelines for completing the final welding process for secure mounting.

Electrical Installation

Main Power Connections

Instructions for connecting the main power supply to the liftgate.

Circuit Breaker Installation

Procedures for installing the circuit breaker for electrical protection.

On-Off Switch Installation (Truck Application)

Guide for installing cab-mounted shut-off switches for trucks.

On-Off Switch Installation (Trailer Application)

Guide for installing trailer shut-off switches.

Remote Hand Control Installation

Steps for installing the remote hand-held control unit.

Plug and Socket Application Setups

Details on connecting hand controls using various socket/plug configurations.

Foot Control Installation

Instructions for wiring and installing the foot-operated control switches.

Wiring Diagrams

Visual representation of the liftgate's electrical system layout.

Hydraulic Schematic

Lubrication and Final Inspection

Decal Placement and Inspection

Guidelines for placing and verifying all safety and operational decals.

Check Off Sheet