EasyManuals Logo

Palfinger MiniFix User Manual

Palfinger MiniFix
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Revision 1.1 19
2. Check the circuit breaker at the main batteries.
Every truck has a circuit breaker on top of the main battery. If equiped, or a trailer, you will also find an
auxiliary battery kit as shown in the pictures below (“Truck Battery” and “Auxiliary Battery”).
If circuit breaker reset arm is popped out, push it back in as shown on the decal ATG-BKR next to your
breaker or on battery box lid.
3. Are the vehicle batteries charged?
Check batteries and the truck charging system. Start truck and run engine in fast idle for charging the
batteries. If liftgate starts working, recharge batteries.
4. Check the fuse in the power pack.
In the Hydraulic Power Unit next to the motor you will find 2 fuses. Check for burned fuse and replace it
with the same type.
DO NOT use higher amperage fuse.
Truck Battery Auxiliary Battery
Location of
circuit breaker
Replace fuse when
Reset your Circuit Breaker

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Palfinger MiniFix and is the answer not in the manual?

Palfinger MiniFix Specifications

General IconGeneral
BrandPalfinger
ModelMiniFix
CategoryLifting Systems
LanguageEnglish

Related product manuals